Troubleshooting | Retract/Deploy Issues Is your gear not going up or coming down the way it should? Sometimes this can be a result in binding. We have laid out some simple step by step tasks to help you troubleshoot your item and get you back on track. If you don't see what you are looking for here, please take a look at our " Support " page or, you can visit our " Contact " page and drop us a line. Thank you. When I bench test my gear they work great but they wont retract into the plane when I'm in flight? BINDING Binding is one of the most common causes of retracts working during bench testing but not during flight. There are several ways this can happen and we will work through each of them here so you can test your gear. Binding - #1 When you put a tire on a car, you never tighten down the lug nuts in a circle. You always go opposite from the one you tightened last and than cross and opposite and then repeat. The same goes for your retracts. If you tighten down one side more than they other, this will result in the retracts becoming off center and restrict its ability to fully retract in the closed position. ​ Binding - #2 Another form of binding is when the kit is built too tight. When a plane is taking off or landing, there is a wind force that pushes up or down on the wings. Click here for a rendering of this . To simulate this process you can place your kits wings onto two secure surfaces, like THIS . This will help show you if your kit will bind around your retracts, wheels or other areas by pushing up or down simultaneously on the wing tips as if it is actually flying. This technique can be used right side up or upside down depending on the direction of travel you wish to test. ​ Binding - #3 (Electric) When I get a new toy, you can find me playing with it over and over again to see if it works but also, because its new and that's why I got it. With electric retracts, this can actually cause them to bind. Every time you power on your retracts, there is a slight power surge to the system. And although this wont hurt the system, it can cause the retracts to turn ever so slightly. And, sometimes it's so little you cant even see it when you're starring right at it. This can cause the retract to "over-tighten" or bind in its current location. And, since our system is designed to shut off when it hits resistance to help protect itself this type of binding can make your gear appear to be inoperable. ​ You will notice on the back of the actuator there is a jack screw. This is what needs to be loosened to remove the built up pressure. ​ Simply remove the screw holding the front of the actuator in place. Using your hands, unwind the actuator to relieve the built up pressure. Reinstall the screw and you should be back flying in no time. CLICK HERE FOR A VISUAL GUIDE.

Zap Prop 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. Below are the items affected by Proposition 65 and the associated warnings ​

Apparel & More Your complete collections to purchase for birthdays, holidays or yourself!!! Vintage Warbird Gear Vintage Warbird Gear Rugs, Pillows & More Rugs, Pillows & More

Privacy Policy Your privacy is important to us. When you provide information to us via our Web site, we protect it according to this policy. If you have any questions, please don't hesitate to let us know. ​Who Is a Typical User of the Robart Manufacturing Web Site? ​ Robart Manufacturing operates primarily as a provider of business-to-consumer services. Unlike many companies and Web sites, we do not focus on consumer users or the collection of consumer data. To the extent we collect information online, our purpose is to better serve our business clients and their employees. ​ What Information Do We Collect Online? ​ Unless otherwise stated in another, more specific policy on the Web pages you are viewing, we collect the following types of information when you browse www.robart.com or any other Robart Manufacturing Web site: ​ * Information you provide directly, such as your name or ordering information when you register or make an online order, or any chat room postings or e-mail messages you send us; ​ * The Web pages your Internet browser visits; ​ * Aggregate data, such as the number of hits per week, per Web page. ​ How Do We Use This Information? ​ Robart Manufacturing does not rent or sell customer lists to other companies. Instead, we use information collected via the Web site in the following ways: ​ * For information you provide directly, such as ordering information or e-mail messages, we use the information to respond to your orders and requests. ​ * For some registration and use data, we may direct you to particular Web pages, customize the Web pages you see, or otherwise increase the relevance of the information you access through the Web site. ​ * For information about Web pages visited, page hits per week, and the like, we use this information internally to improve the design of our Web pages. ​ * Robart Manufacturing may use third-party storage or service-provider companies to perform some functions including the processing of data. ​ Robart Manufacturing may disclose information to protect our rights or property, to enforce our terms of use and legal notices, as required or permitted by law, or at the request of government regulators or other law enforcement officials and the courts (including the issuance of a valid subpoena). We shall have no duty to notify you of such compliance with the law. ​ E-Mail Lists ​ Robart Manufacturing maintains e-mail lists to keep interested parties informed about our company, events, products, support, and more. We do not sell the addresses on our list, but we may make information available to specific business partners, sponsors, or service providers. ​ Users may voluntarily request to join our mailing lists by signing up or opting in through a form on our Web site. To be removed from a Robart Manufacturing mailing list, simply contact us now. ​ Notification of Data Processing in the United States of America ​ When you choose to submit information through the Web site, Robart Manufacturing and its affiliates may transfer, process and store the information in countries in which Robart Manufacturing and its affiliates maintain offices, including the United States. The United States does not regulate data protection in the same manner as other countries, including the Member States of the European Union. Accordingly, the data that you submit to Robart Manufacturing may be transferred to, processed, or stored in countries where the data protection laws are different than those of your country of residence. ​ Information Storage and Updates ​ You can update your contact information by contacting us at any time. We may keep all information in an off-line form, for archival purposes or as otherwise required by law. ​ Web Site Revisions ​ We constantly update the features of our Web site to better serve you and all our customers, so this policy may also be revised from time to time. Robart Manufacturing may modify this policy without advance notice and any modifications are effective when they are posted here. By using our Web site, you indicate your understanding and acceptance of the terms of the policy posted at the time of your use. If you have any questions, please contact us at your convenience.

eGift Card Looking for a gift for a loved one and don't know what to get them? No problem. And don't forget to take a look at the Robart Apparel for some vintage designs and Robart gear. eGift Card You can't go wrong with a gift card. Choose an amount and write a personalized message to make this gift your own. ... Διαβάστε περισσότερα Εισαγάγετε το ποσό $ Ποσότητα Αγορά τώρα

Robart Support Videos Take a look at our support videos for product reviews, tips and troubleshooting techniques. RobartMfg Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 05:01 Robart Toe Tool Square up your struts and oleos with the Robart Toe Tool. These are available in 3/16" and 1/4" diameters. https://robart.com/collections/drill-jigs-and-accessories #robart #rcaircraft #remotecontrol #scalemodel #zap Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:49 Robart Micro Tail Retract Robart offers a micro tail retract for airplanes up to 10 lbs. Part 121 #robart #rcairplanes #rcaircraft #zap #zapglue Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:17 Got Battery Corrosion? Zap Rail Zip to the Rescue!!! Got batteries with a gob of corrosion on the terminals? Zap Rail Zip is a great product to clean it off and keep it off!!! https://robart.com/collections/zap-glue-zap-misc-products/products/1-oz-28-4ml-rail-zip-track-cleaner-btl #battery #batteryproblem #corrosionresistance #corrosionprotection #zap #robart #electric #carbattery Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 05:25 How to mount your Robart Control Box. Here is a quick way to mount your Robart Control box to you aircraft. #robart #rcairplane #modelairplanes #scalemodels #zap Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 06:28 vacuum pump 101422 Robart Vacuum/Pump combo. Part #164E-VP. Why have a seperate pump and vacuum, when you can have both. Check out the Robart Vacuum/Pump combo. Great for your next model project, car, truck, boat, RV and workshop. https://robart.com/collections/air-systems-components-accessories/products/164e-vp-rechargeable-electric-vacuum-and-air-pump #robart #rcairplanes #pneumatic #vanlife #rvlife #boat #cleaning Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:14 Back by popular demand...Robart Hand Pump After taking this pump off of the market, Robart has brought back our Hand Pump. Part number 164G. #pneumatic #rcaircraft #robart #scalemodel #warbird #warbirds Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:53 King Max servo available from Robart Per your request, Robart now offers a servo to operate our line of air valves as well as steering your airplane via nose gear or tail retract. https://robart.com/products/179cls28575h?_pos=11&_sid=a926e36c4&_ss=r #robart #pneumatic #rcaircraft #scalemodel #retractable Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:30 Gear door sequencer available from Robart Make sure that your RC Aircraft has the right scale look!!! Here are the gear door sequencers you need to make sure your plane has the look you want. These are available for pneumatic and electric operated landing gear. Click here for more information: https://robart.com/collections/air-systems-components-accessories/products/pneumatic-gear-door-sequencer #robart #rcaircraft #pneumatic #giantscale Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:13 Robart Quick Disconnect with Check Valve (190-CV) If you are a like the Robart Quick Disconnects, you will LOVE our new 190-CV. These are the Robart Quick Disconnects but with a check valve to keep the air pressure in your pneumatic system. https://robart.com/products/190-cv-air-line-quick-disconnects-with-check-valve?_pos=1&_sid=b83100633&_ss=r Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 09:08 Robart Retracts - TopRC Corsair Here is the introductory video for the Robart Retracts to drop into the TopRC Corsair ARF. https://robart.com/products/toprcm-corsair-combo-top-r-c-zero-retract-combo-kit #robart #rcaircraft #giantscale Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 05:06 157EZ Air Kit from Robart Here is the EZ air kit from Robart. This kit makes setting up your pneumatic system EASY! https://robart.com/collections/air-systems-components-air-kits/products/157ez-large-scale-deluxe-ez-connect-air-kit #robart #pneumatic #rcaircraft #giantscale #scalemodel Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 07:27 Is my air valve leaking or my air cylinder? In this video Robart explains how an air valve may show it is leaking but it is really an air cylinder that is leaking. www.robart.com #robart #pneumatic #rcaircraft #modelbuilding #scalemodel Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 06:36 Zap-O Xtra (PT-25X) foam safe, non-fuming, no accelerator needed CA If you work with foam, wood or other building materials, the Zap-O Xtra is a great product for you. It requires no accelerator and is will not irritate those that are sensitive to traditional CA glues. https://robart.com/collections/zap-glue-zap-cas/products/pt-25x-1-oz-zap-o-xtra-foam-safe-ca #zapglue #modelbuilding #rcaircraft #flytying #woodworking #modeltrain #rcboat #rccar Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 03:16 Robart Blue Air Valve (#167) Robart offers the blue valve as a 5 port, 2 position valve. This valve offers easy installation of your pneumatic system. https://robart.com/collections/air-systems-components-air-valves/products/2-position-5-port-air-control-valve-blue #robart #pneumatic #warbird #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:06 Robart Pneumatic Air Tanks - 3 sizes to fit your model! Here are the three pneumatic air tanks from Robart. https://robart.com/collections/air-systems-components-air-tanks #robart #rcaircraft #warbirds #pneumatic Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:59 Robart Quick Connect Straight Coupler Robart provides these very easy quick straight coupler. https://robart.com/collections/air-systems-components-air-couplers/products/227-quick-straight-soupler #robart #pneumatic #warbird #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 03:07 Robart Pneumatic QUICK TEES Looking for a quick way to put your pneumatic system together? Use the Robart Quick Tees (Part #226). Simply push the airline into the tee and you are done! https://robart.com/collections/air-systems-components-air-couplers/products/quick-tees-1-8-x-1-16 #robart #pneumatic #rcaircraft #giantscale Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:32 Robart Scale Focke-Wulf Wheels Finish off your Giant Scale Focke-Wulf RC Aircraft with these scale wheels! Powder coated black, Rivot Detailing and Scale Notch. https://robart.com/products/aluminum-wheels-for-5-6-tire-1-4-axle #robart #rcaircraft #giantscale Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 06:42 Robart Giant Scale 85 Degree Offset (6" wheel) Non-Rotating Retracts Here are the Robart part numbers 154 & 154E pneumatic and electric retracts. These retracts are for planes weighing in between 20 - 55 lbs. The angle of deployment is 85 Degree and will accommodate a 6" wheel. Pneumatic: https://robart.com/collections/retracts-by-aircraft-weight-20-55lbs-non-rotating-pneumatic/products/85-deg-main-retract-w-6-p-51-offset-strut Electric: https://robart.com/collections/retracts-by-aircraft-weight-20-55lbs-non-rotating-electric/products/85-deg-electric-main-retract-w-6-p-51-offset-strut #robart #rcaircraft #scalemodel #robartretracts Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:06 Zap Zip Kicker Pump Dispenser (PT-715) Quick tip: Use a brush when dispensing the Zap Zip Kicker. https://robart.com/collections/zap-glue-zap-glue-accelerators/products/zip-kicker #zapglue #zap #robart Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:08 Robart 0.60 size tail retract (Part #121) Here is the Robart 0.60 size and smaller mechanical tail retract. Very easy installation, set up and operation. https://robart.com/collections/retracts-by-aircraft-weight-tailwheels-retractable-tailwheels-mechanical/products/60-size-retractable-tailwheel #robart #rcaircraft #warbird Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:47 Robart Clevis Rod End Attachment These are excellent for attaching control horns, pneumatic valve steams, push rods, steering components... #334: https://robart.com/collections/control-horns/products/2-56-clevis-rod-end #335: https://robart.com/collections/control-horns/products/4-40-clevis-rod-end #robart, #rcaircraft, #scalemodel #modeltrain Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 07:13 Robart Super Ball Link Control Horns Here are the Robart Super Ball Link Control Horns. These consist of sizes from 1/2" to 1 1/4". The "Super" lets you know that these have a metal ball inside the control horn. Excellent for giant scale build projects! https://robart.com/collections/control-horns #robart #rcaircraft #giantscale #scalebuild Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:41 Robart ball link control horns Check out the Robart Ball Link Control Horns. These are part numbers 326 (5/16"), 327 (1/2"), 328 (5/8") and 329 (3/4"). These are an excellent linkage for any control surface. https://robart.com/collections/control-horns #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 03:58 Robart Air Line Restrictor (Part #189) Operational Video As requested, here is an operational video of the Robart Air Line Restrictors. Robart part #189. https://robart.com/collections/air-systems-components-air-couplers/products/air-line-restrictors #robart #rcaircraft #pneumatic #pneumaticvalve Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:04 Robart Super Stand II (Part #402) Here is a quick introduction of the Robart Super Stand II. This probably the best airplane or hobby workers stand on the market. This stand will hold up your RC Aircraft, RC Boat, RC Car, wood working project....... The list goes on! https://robart.com/collections/hobby-tools-airplane-stands/products/super-stand-ii #robart #rcaircraft #hobby #diy Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:13 Robart 570RS & 570RSE Robart's main retracts for the Top RC Model Zero, Mustang, Spitfire and Aspire. These may even fit your plane! https://robart.com/products/570rse-electric-retracts?_pos=1&_sid=7951392cf&_ss=r #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:05 Zap Blue Thread Locker (PT-42) If you have any threaded parts, don't forget to lock them down with Zap Blue Thread Locker. The bottle works great with Zap Flexi-Tips (PT-21) and Z-Ends (PT-18). https://robart.com/collections/zap-glue-zap-thread-lockers/products/20-oz-6ml-z-42-blue-threadlocker-pkg #zapadhesives #robart #metalwork #rcaircraft #threadlocker Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:46 Robart rail mounted nose gear for planes 12-24 lbs. Check out this video from Robart showing their rail mounted nose gears for planes weighing in at 12-24 lbs. These gear have angles of deployment of 90 deg, 95 deg, 100 deg, 105 deg and 110 deg. https://robart.com/collections/retracts-by-aircraft-weight-12-24lbs-630-series-nose-pneumatic #robart #rcaircraft #retracts Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:47 Robart foam inserts for 2"-4" tires Robart offers foam inserts for our 2" - 4" tires. This gives additional support to the hollow tires. https://robart.com/collections/wheels-scale-wheels-2-4/products/foam-inserts-for-scale-wheels-2-4 #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 03:31 Robart 594 wire strut kit Check out the Robart 594 wire strut kit to add wire struts to your 590 Series main retracts. These will fit in the following retract kits: 590M, 590E, 590P, 591M, 591E & 591P https://robart.com/products/prs-wire-strut-kit-main-gear?_pos=1&_sid=968d87ae6&_ss=r #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:04 Robart Air Line Restrictors (Part #189) Here is an explanation of the Robart Air Line Restrictors (Part #189). https://robart.com/products/air-line-restrictors?_pos=1&_sid=b5c929091&_ss=r #robart #rcaircraft #pneumatic Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:21 Robart 650 Series Robostrut Cut Down Instructions Here are the instructions on how to cut down the 650 Series RoboStruts from Robart. https://robart.com/collections/robostruts-by-diameter-3-8-dia #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 03:18 Fixing Ceramic with Zap Gel Here is the best way to fix ceramic! Use Zap Gel, Zip Kicker and a little Debonder all from Zap. #zapglue #zap #ceramics #glue Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:52 Robart B-25 Tri-Gear Retracts Robart offers the retracts for the 118" Zirolli B-25. This is a tri-gear set, including a pair of mains and the nose gear. https://robart.com/collections/gear-finder-ziroli-b-25-118 #robart #rcaircraft #ziroli Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:36 Robart air cylinder part #166 (5/8" bore, 2 1/8" stroke) This video details the Robart Air Cylinder, part #166. This air cylinder is a 5/8" bore, with a 2 1/8" stroke. https://robart.com/collections/air-systems-components-air-cylinders/products/5-8-x-2-1-8-stroke-air-cylinder #robart #pneumatic #rcaircraft #remotecontrol Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:48 Robart 3/8 Bore Air Cylinder Part #165 Check out this Robart air cylinder: Part #165 Mounting bracket included 3/8" bore 1 1/8" stroke 2-56 internal threading on push rod https://robart.com/products/3-8-x-1-1-8-stroke-air-cylinder?_pos=1&_sid=639860d7c&_ss=r #robart #rcaircraft #pneumatic #remotecontrol Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:36 Zip Kicker PT-50 Aerosol Accelerator PT-50 is probably the most popular accelerator volume Zap has. This is commonly used by the woodworkers, modelers and general industrial uses. This is a Heptane based accelerator, so it will not craze or attack most finishes. #zapadhesives #robart #woodworking #rcaircraft #diy Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 06:05 Robart Brake Setup for Giant Scale Planes with wheel from 4" - 6" This video details how to set up the brake system using the Mini Hobby Proportional Brake Valve (part #175) on wheels from 4" to 6". These wheels will use the Robart 140SET and 139Set, respectively. #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:30 Robart Pressure Gauge part #173 Here is a quick demo of the Robart onboard pressure gauge (part #173). This is a quick and easy way of getting an estimated reading of the air pressure in you pneumatic system. This gauge goes up to 100 psi. https://robart.com/collections/air-systems-components-accessories/products/pressure-gauge #robart #rcaircraft #pneumatic Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:10 Quick and easy grind flat instructions! Robart offers this easy instruction on how to perform a grind flat. #robart #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:13 Zaping your wood threads Ever strip the threads on a wood project? Zap-A-Gap will fix that! Here is a great way to fix the threading. https://robart.com/collections/zap-glue-zap-cas/products/zap-a-gap-ca #zapglue #robart #woodworking #rcaircraft #homeprojects #DIY Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 07:28 Robart 524 Main Wire Struts This is the Robart part number 524, main wire struts for the 500 series main retracts. https://robart.com/products/510-530-550-main-gear-wire-kit?_pos=1&_sid=19eff25bc&_ss=r #robart #rcaicraft #zapglue Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:05 Robart 160 - Mechanical giant scale tail retract This is the giant scale, mechanically operated, tail retract from Robart. Simple servo and push rod operation. https://robart.com/collections/retracts-by-aircraft-weight-tailwheels-retractable-tailwheels-mechanical/products/1-5-scale-mechanical-retractable-tail-wheel #robart #rcaircraft #zapglue Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 04:53 How to cut down a Robart Robostrut. Here is how to use the plug to cut down a Robart Robostrut. #robart #zapglue #rcaircraft #remotecontrol Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:01 Zap Glue Plasti-Zap with brush on applicator (PT-102) If you are looking for the perfect glue for plastic to plastic, here it is. Zap Glue's Plasti-Zap. With the brush on applicator, you have full control of the glue. Part number PT-102. https://robart.com/collections/zap-glue-zap-cas/products/1-3-oz-9-46ml-plastic-zap-ca-btl #Zapglue #Robart #rcaircraft #modeltrain #RCcars Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:58 Robart air lines part #169, #169B & #185 Three different air lines that Robart offers. Part numbers 169, 169B & 185: 169: https://robart.com/collections/air-systems-components-accessories/products/10-ft-pressure-tubing-5-red-5-purple 169B: https://robart.com/collections/air-systems-components-accessories/products/10-ft-black-air-line-tubing 185: https://robart.com/collections/air-systems-components-accessories/products/6-ft-pressure-tubing-orange-air-only #robart #pneumatic #zapglue #rcaircraft Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:24 Robart hand pump (part #164G) Looking for a hand pump for your pneumatic system? Check out this video from Robart. https://robart.com/collections/air-systems-components-accessories/products/hand-air-pump-w-gauge #robart #zapglue #pneumatic #rcaircraft #remotecontrol Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:37 Zap foam safe system Here is a brief description of the Zap Adhesives foam safe system. Includes Zap-O (PT-25) and Foam Safe Accelerator (PT-28). https://robart.com/collections/zap-glue-zap-cas/products/1-oz-28-4ml-zap-o-foam-safe-ca-odorless-btl #Zapglue #ZapO #Robart #FoamSafe Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:36 Robart 643HDRS - pneumatic - 90 degree nose gear The 643HDRS is a pneumatic 90 degree nose gear from Robart. Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:28 Robart drum carbide cutters. Robart offers a drum carbide cutter. These are available in a fine and a coarse grit. https://robart.com/collections/hobby-tools-carbide-cutters/products/carbide-cutter-drum-coarse Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:12 Robart Carbide Cutter Combo Kits Here is a brief description of the Robart Carbide Cutters. Excellent for model building, woodworking, carving, horse shoeing and many other uses. https://robart.com/collections/hobby-tools-carbide-cutters/products/carbide-cutter-6-assorted-fine Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:12 Robart Green Valve (Part# 186) Here is a perfect one way valve for your pneumatic system. Robart's part number 186 or the Green Valve. https://robart.com/collections/air-systems-components-air-valves/products/1-position-2-port-air-control-valve-green Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:59 Robart Retracts for the Hangar 9, 20CC, P-51 Robart offers a set of retracts for the Hangar 9, 20CC P-51: Mains: 551RS (pneumatic) and 551RSE (electric), Robostruts: 663L & 663R, Wheels: 138D0316-116001M. https://robart.com/collections/gear-finder-hangar-9-p-51-20-cc Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:51 Robart talks about current events March 14, 2020 With Toledo being canceled and Corono Virus, this is a great time to look at Robart's product set. We are Made in the USA! www.robart.com 630-584-7616 Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:21 1/8" Hinge Points from Robart (part #307) Here is some quick information about the Robart 1/8" hinge points. These are available in a 6 pack (part #307) or a 15 pack (part #308). https://robart.com/products/1-8-steel-pin-hinge-points-6?_pos=1&_sid=30b512e63&_ss=r Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:52 Robart air line retainer fittings (part #170) Looking for your cheapest pneumatic insurance policy ever? Here are the Robart air line retainer fittings (part #170). https://robart.com/collections/air-systems-components-accessories/products/air-line-retainer-nuts Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:16 Robart Brass Tee's (Part Number: 225) A quick introduction video to the Robart Brass Tee's (Part #225). https://robart.com/collections/air-systems-components-air-couplers/products/brass-airline-tees Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 01:36 New MR-3000 Ultra Thick CA Glue available from Robart Check out the new MR-3000 Ultra Thick CA Glue from Pacer available through Robart. This is a great CA for highly porous surfaces or larger gaps. https://robart.com/collections/zap-glue-zap-cas/products/fg04460-20-gram-mr-3000-ca-glue Αναπαραγωγή βίντεο Αναπαραγωγή βίντεο 02:21 Robart Drill Centering Jig (part number 319) Here is a great way to drill a center hole in your next project. https://robart.com/collections/control-hinges/products/hinge-point-drill-jig Φόρτωση περισσότερων

RoboStruts & Wire Kits Robart Gear & Accessories are designed and built by Aircraft Weight . Using a smaller diameter Strut or Wire Kit that is rated for your plane will likely fail, will void the warranty and will most likely damage both your plane and your retracts. If you are looking for replacement parts for someone else's gear, please keep in mind. Robart Gear & Accessories are designed to work with Robart Gear & Accessories. We have the highest tolerances in the industry and we DO NOT test our items to be compatible with other manufacturers, outside of our OEM items. Thank you. Φιλτράρισμα κατά By Diameter 5/32" 1/8" 3/16" 3/8" 7/16" 1/2" 5/8" By Weight 5-10lbs 5-12 lbs 6-12lbs 8-18lbs. 12-18lbs 18-25lbs 20-55lbs Up to 26 lbs Axle Size 1/8" Axle 3/16" Axle 1/4" Axle Wheel Size 2 1/4" 2 3/4" 3" 3 1/4" 3 1/2" 4" 4 1/2" 5" 5 1/4" 6" Wire Strut Kits 524 525 594 595 624 Προσαρμοσμένο φίλτρο Accessories Fork Fixed Steerable Nose Gear Gear Door Brackets Left Offset Mounting Bracket Right Offset Straight Trailing Link Γρήγορη προβολή 145105A - RH STRUT ASSY 5 IN Τιμή $91.94 Προσθήκη στο καλάθι Γρήγορη προβολή 145106A - LH STRUT ASSY 5 IN Τιμή $91.94 Προσθήκη στο καλάθι Γρήγορη προβολή 145205A - STRUT ASSY RH 6 IN Τιμή $89.70 Προσθήκη στο καλάθι Γρήγορη προβολή 145206A - STRUT ASSY LH 6 IN Τιμή $89.70 Προσθήκη στο καλάθι Γρήγορη προβολή 155102A - Robostrut mounting bracket - 1/2" Τιμή $18.11 Προσθήκη στο καλάθι Γρήγορη προβολή 159 - Steerable Fixed Nose Gear w/Offset Strut Τιμή $187.95 Προσθήκη στο καλάθι Γρήγορη προβολή 159F - Steerable Fixed Nose Gear w/Fork Strut Τιμή $220.74 Προσθήκη στο καλάθι Γρήγορη προβολή 524 - 510/530/550 Main Gear Wire Kit Τιμή $28.69 Προσθήκη στο καλάθι Γρήγορη προβολή 525 - 510/530/550 Nose Gear Wire Kit Τιμή $19.95 Προσθήκη στο καλάθι Γρήγορη προβολή 594 - PRS Wire Strut Kit Main Gear Τιμή $27.54 Προσθήκη στο καλάθι Γρήγορη προβολή 595 - PRS Wire Strut Kit Nose Gear Τιμή $19.49 Προσθήκη στο καλάθι Γρήγορη προβολή 620110A - LH STRUT ASSEMBLY Τιμή $74.69 Προσθήκη στο καλάθι Γρήγορη προβολή 620111A - RH STRUT ASSEMBLY Τιμή $74.69 Προσθήκη στο καλάθι Γρήγορη προβολή 622110A - LH STRUT ASSEMBLY Τιμή $54.91 Προσθήκη στο καλάθι Γρήγορη προβολή 622111A - RH STRUT ASSEMBLY Τιμή $54.91 Προσθήκη στο καλάθι Γρήγορη προβολή 622410A - RH STRUT ASSY Τιμή $86.25 Προσθήκη στο καλάθι Γρήγορη προβολή 624 - 612 wire kit Τιμή $20.64 Προσθήκη στο καλάθι Γρήγορη προβολή 630SBC - STEERING SERVO MOUNTING BRACKET STANDARD SERVO 1/2'' STRUT 1/4'' STEERI Τιμή $21.79 Προσθήκη στο καλάθι Γρήγορη προβολή 650 - 3/8" dia. Straight RoboStrut Τιμή $66.64 Προσθήκη στο καλάθι Γρήγορη προβολή 650DB - 3/8" dia RoboStrut Gear Door Mounting Brackets Τιμή $15.47 Προσθήκη στο καλάθι Φόρτωση περισσοτέρων

Zap Adhesives ZAP is the finest line of CA formulas, epoxy systems, thread lockers and resins. For more information on Zap Adhesives or would like to becomes a dealer, please contact us at 630-584-7616 | ZAP is a registered trad mark of Pacer Technologies Adhesives, Epoxies & More Build, Fix, Repair. MSDS Safety Data Sheets Bulk Order Request Commercial Account Catalogs See all our Products ZapApp FINDING THE RIGHT GLUE FOR YOUR NEXT PROJECT Select material1 Select material2

Electric Air Pump Troubleshooting Please follow the information below for warrantied replacement pumps. WARRANTY All Robart items are warrantied for 1 year from date of shipment as long as they are undamaged from the customer and purchased directly through Robart or through a licensed Robart dealer with proper documentation. ​ Robart does not provide technical suppor t for our electric air pumps. If you feel you have a pump inoperative due to manufacturer error, and, it falls within the Robart warranty, please use the following instructions to return to us for testing and replacement. ​ Mail your pump. a copy of your receipt and your name, mailing address, email & phone number to the following address: ​ Robart Mfg Attn: Warranty Replacement 155 Oswalt Ave. Batavia, IL 60510 ​ Once your pump arrives and is processed in, it will go to the repair department for testing. Should there be any concerns, a Robart customer service representative will contact you. If the return is indeed a manufacturer defect and falls within 1 year from date of purchase from licensed Robart dealer, we will process a warranty claim to send you out a new one. ​ Once this ships you will automatically receive an email with a tracking number and another email with a copy of your new receipt. ​ For any additional question, please visit our FAQ page and SUPPORT page. Thank you.

Product Return Terms & Conditions We want you to be completely satisfied with your purchase. If for any reason you are not satisfied with your purchase, we will be happy to accept your return (if purchased directly from Robart) within 30 days, under the following terms: Return Policy Returned merchandise must be in unused condition and in its original packaging. The mounting of retracts, air tanks and air valves constitutes “used merchandise”. Most returns will be subject to a 25% restocking fee. Returns in poor condition may be refused or the restock fee may be increased to cover the cost of repairing and repacking the product to new condition. When packing your merchandise for return, please be sure all of the original packing materials and instruction sheets are included. Please note if an item is damaged in transit due to improper packaging, you may be charged for parts and labor to repair the item to new condition. Please provide the following information in your return either typed or printed legibly. Returned items are not guaranteed that the product will be accepted for an exchange or return. Freight is to be pre-paid on all returns unless you call to receive special authorization from Robart Mfg.. - A copy of your original invoice if purchased through a robart licensed dealer or distributor. If purchased directly through robart Mfg., please include your Invoice number or order number. - Your name, address, phone number and email address, if purchased anywhere other than directly through robart Mfg. Freight charges will not be refunded. The customer is responsible for insured shipping back to our facility. Please ship back by a tractable shipping company. (i.e. UPS or Fed-Ex) All warrantied products will be returned freight free within the United States. All warrantied products returned outside the US will incur a shipping charge to have the product shipped back. Returns sent COD will be refused. Sorry we can’t accept returns on Custom Made Retracts or Struts. In addition modifications made by customers will void the warranty and returns will be refused. Defective Merchandise If you receive a defective item please call us for return instructions. In most cases, we will accept the return and either fix or replace the item if warranty applies if returned within the 1 year from date of shipping applies. Please send a copy of the receipt along with the defective merchandise. Damaged Merchandise If a package has been damaged in shipping and it is apparent, please refuse the delivery. If you already accepted the package and discover that it has been damaged please call us immediately at 630-584-7616. Do not wait. There is a limited amount of time we can file a claim for damaged in shipping items. Please send all returns to the following address. DO NOT attention them to a specific individual unless that robart representative asked you to. Robart Mfg, Inc. - Returns 155 Oswalt Batavia, IL 60510 Ph: (630) 584-7616 Fx: (630) 584-3712

Zap Bulk Orders Please provide all information below. Your billing address must be a commercial address. Bulk ordering is not available for residential locations. Once we receive your application, a Zap Customer Service Representative will contact you within 3 business days. Thank you for your interest in Zap Contact Us First Name Last Name Email Company Billing Address Years in Business Code Phone Industry Website Please provide the part numbers you are interested in If you don't remember the item number, please CLICK HERE to see all Zap products. Thank you. ​ This form is only for Zap Bulk Order Inquiries. Any other please visit the contact page for all other questions. Submit Thanks for submitting!

Robart Prop 65 Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. Below are the items affected by Proposition 65 and the associated warnings ​